--- header unit 0: primary ---
SIMPLE = T
BITPIX = 16 / 8 unsigned int, 16 & 32 int, -32 & -64 real
NAXIS = 2 / number of axes
NAXIS1 = 1024 / fastest changing axis
NAXIS2 = 1032 / next to fastest changing axis
BSCALE = 1.0000000000000000 / physical = BZERO + BSCALE*array_value
BZERO = 32768.000000000000 / physical = BZERO + BSCALE*array_value
DATE-OBS = '2019-03-30T23:19:56' / [ISO 8601] UTC date/time of exposure start
EXPTIME = 3.78000000000E+000 / [sec] Duration of exposure
EXPOSURE = 3.78000000000E+000 / [sec] Duration of exposure
SET-TEMP = -30.000000000000000 / CCD temperature setpoint in C
CCD-TEMP = -30.000000000000000 / CCD temperature at start of exposure in C
XPIXSZ = 30.000000000000000 / Pixel Width in microns (after binning)
YPIXSZ = 30.000000000000000 / Pixel Height in microns (after binning)
XBINNING = 2 / Binning level along the X-axis
YBINNING = 2 / Binning level along the Y-axis
XORGSUBF = 0 / Subframe X position in binned pixels
YORGSUBF = 0 / Subframe Y position in binned pixels
READOUTM = '500KHz' / Readout mode of image
FILTER = 'N' / Filter name
IMAGETYP = 'Flat Field' / Type of image
FOCALLEN = 4800.0000000000000 / Focal length of telescope in mm
APTDIA = 600.00000000000000 / Aperture diameter of telescope in mm
APTAREA = 271433.61282348633 / Aperture area of telescope in mm^2
SBSTDVER = 'SBFITSEXT Version 1.0' / Version of SBFITSEXT standard in effect
SWCREATE = 'MaxIm DL Version 6.08 141223 1VH7F' / Name of software
SWSERIAL = '1VH7F-K9Y6J-9C35K-TUXJ7-6J8QF-V2' / Software serial number
SITELAT = '43 28 18' / Latitude of the imaging location
SITELONG = '87 10 24' / Longitude of the imaging location
JD = 2458573.4721759260 / Julian Date at start of exposure
OBJECT = '' / Target object name
TELESCOP = '' / Telescope name
INSTRUME = 'FLI' / Detector instrument name
OBSERVER = '' / Observer name
NOTES = ''
FLIPSTAT = ''
SWOWNER = 'Tan Yong Liang' / Licensed owner of software
HISTORY File was processed by PinPoint 6.0.6 at 2019-03-30T23:20:15
DATE = '30/03/19' / [old format] UTC date of exposure start
TIME-OBS = '23:19:56' / [old format] UTC time of exposure start
UT = '23:19:56' / [old format] UTC time of exposure start
TIMESYS = 'UTC' / Default time system
RADECSYS = 'FK5' / Equatorial coordinate system